Beko BIM24400 User Manual - Page 29
Replacing
View all Beko BIM24400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Inner glass panel (2) must be installed into the plastic slot close the innermost glass panel (1). When installing the innermost glass panel (1), make sure that the printed side of the panel faces towards the inner glass panel. It is important to seat lower corner of inner glass panel into the lower plastic slot. Push the plastic part towards the frame until you hear a "click". Replacing the oven lamp DANGER: Before replacing the oven lamp, make sure hat the product is disconnected from mains and cooled down in order to avoid the risk of an electrical shock. Hot surfaces may cause burns! The oven lamp is a special electric light bulb that can resist up to 300 °C. See Technical specifications, page 9 for details. Oven lamps can be obtained from Authorised Service Agents or technician with licence. * Position of lamp might vary from the figure. 1 * The lamp used in this appliance is not suitable 1 for household room illumination. The intended purpose of this lamp is to assist the user to see foodstuffs. The lamps used in this appliance have to withstand extreme physical conditions such as temperatures above 50 °C. If your oven is equipped with a round lamp: 1. Disconnect the product from mains. 2. Turn the glass cover counter clockwise to remove it. 3. Remove the oven lamp by turning it counter clockwise and replace it with the new one. 4. Install the glass cover. 29/EN