2010 Yamaha Motorsports Apex Owners Manual - Page 74

2010 Yamaha Motorsports Apex Manual

Page 74 highlights

Periodic maintenance and adjustment 1 1 3 1. Rear axle nut 1. Left adjusting bolt 2. Right adjusting bolt 3. Locknut 3 2 2. 3. 4. Lift the rear of the snowmobile onto a suitable stand to raise the drive track off the ground. Start the engine and rotate the drive track one or two turns. Stop the engine. Check the drive track alignment with the slide runners. If the alignment is incorrect, loosen the locknut on the left and the right sides of the snowmobile, then align the drive track by turning the adjusting bolt on each side. Shifted to right 1 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal 1. Slide runner Drive track alignment Left adjusting bolt Right adjusting bolt Shifted to right Turn out Turn in Shifted to left Turn in Turn out 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102

Periodic maintenance and adjustment
68
2.
Lift the rear of the snowmobile onto a suit-
able stand to raise the drive track off the
ground.
3.
Start the engine and rotate the drive track
one or two turns. Stop the engine.
4.
Check the drive track alignment with the
slide runners. If the alignment is incorrect,
loosen the locknut on the left and the right
sides of the snowmobile, then align the
drive track by turning the adjusting bolt on
each side.
Shifted to right
1.
Rear axle nut
1.
Slide runner
Drive track
alignment
Shifted to
right
Shifted to left
Left adjusting
bolt
Turn out
Turn in
Right adjust-
ing bolt
Turn in
Turn out
1
1
1.
Left adjusting bolt
2.
Right adjusting bolt
3. Locknut
1. Forward
2. Gap
3.
Slide runner
4.
Drive track
5.
Slide metal
3
1
2
3