2010 Yamaha Motorsports Apex Owners Manual - Page 56
2010 Yamaha Motorsports Apex Manual
Page 56 highlights
Periodic maintenance and adjustment ESU11835 Adjusting the throttle cable free play 1. 2. 3. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud. (See page 46 for removal procedures.) Remove the headlight unit bolt on each side of the snowmobile and loosen the quick fastener screws shown on the top cover. 2 3 1 1. Locknut 2. Throttle cable free play adjusting bolt 3. Throttle cable free play Throttle cable free play: 2.0-3.0 mm (0.08-0.12 in) 7. 8. Tighten the locknut. Connect the multi-function meter unit coupler and headlight couplers, and then install the headlight unit, making sure to fit the slots on its bottom over the projections on its stay. 1. Headlight unit bolt 1 2 1. Quick fastener screw 4. 5. 6. Disconnect the multi-function meter unit coupler and headlight couplers, and then remove the headlight unit. Loosen the locknut. Turn the adjusting bolt in or out until the specified throttle cable free play is obtained. 1. Slot 2. Projection 9. Install the headlight unit bolts, and then tighten them to the specified torque. Headlight unit bolt tightening torque: 3 Nm (0.3 m·kgf, 2.2 ft·lbf) 10. Tighten the quick fastener screws on the top cover. 11. Install the shroud. 50