2010 Yamaha Motorsports Apex Owners Manual - Page 62
2010 Yamaha Motorsports Apex Manual
Page 62 highlights
Periodic maintenance and adjustment 8. Remove the oil filler cap, and then remove the engine oil drain bolt and its gasket to drain the oil from the oil tank. Tightening torques: Engine oil drain bolt (crankcase): 30 Nm (3.0 m·kgf, 22 ft·lbf) Engine oil drain bolt (oil tank): 16 Nm (1.6 m·kgf, 11 ft·lbf) 12. Add 2.0 L (2.11 US qt, 1.76 Imp.qt) of the recommended engine oil to the oil tank, and then install and tighten the oil filler cap. 13. Start the engine, warm it up for several minutes, and then turn it off. 14. Remove the oil filler cap, and then add sufficient oil of the recommended type to raise it to the "H" level mark on the dipstick. (See above for checking procedures.) NOTICE: When adding the engine oil, be careful not to fill above the "H" level mark on the dipstick. Use only the recommended oil. (See page 84.) Make sure that no foreign material enters the engine oil tank. [ECS00462] 2 1 1. Engine oil drain bolt (oil tank) 2. Gasket 9. Place an oil pan under the engine to collect the used oil. 10. Remove the engine oil drain bolt and its gasket to drain the oil from the crankcase. 1 2 1. Engine oil drain bolt (crankcase) 2. Gasket TIP Dispose of used oil according to local regulations. 11. Install the engine oil drain bolts and their new gasket, and then tighten the bolts to the specified torques. 1. "H" level mark 2. "L" level mark Recommended engine oil: See page 84. Oil quantity: With oil filter cartridge replacement: 3.0 L (3.17 US qt, 2.64 Imp.qt) Without oil filter cartridge replacement: 2.8 L (2.96 US qt, 2.46 Imp.qt) Total amount: 3.8 L (4.02 US qt, 3.34 Imp.qt) 56