2009 Yamaha Motorsports FX Nytro XTX Owners Manual - Page 57

2009 Yamaha Motorsports FX Nytro XTX Manual

Get 2009 Yamaha Motorsports FX Nytro XTX PDF manuals and user guides View all 2009 Yamaha Motorsports FX Nytro XTX manuals

Page 57 highlights

Periodic maintenance and adjustment 7. Insert the dipstick into the oil filler hole, and then tighten the oil filler cap. 8. Connect the oil level gauge coupler. 9. Install the right side cover and the shroud. To change the engine oil (with or without oil filter cartridge replacement) 1. Place the snowmobile on a level surface and apply the parking brake. 2. Start the engine, warm it up for several minutes, and then turn it off. 3. Remove the shroud, the left side cover, the right side cover, and the drive guard. (See pages 17 and 44 for removal procedures.) 4. Remove the left lower cover, the right lower cover, and the bottom panel. 2 2 1 3 1. 2. 3. 4. Right lower cover Quick fastener Bolt Washer 3 4 2 2 4 1. 2. 3. 4. 3 Left lower cover Quick fastener Bolt Washer 3 1 1. Bottom panel 2. Quick fastener 5. 6. Place an oil pan under the oil tank to collect the used oil. Disconnect the oil level gauge coupler. 1. Oil level gauge coupler 2. Oil filler cap 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Periodic maintenance and adjustment
51
7.
Insert the dipstick into the oil filler hole,
and then tighten the oil filler cap.
8.
Connect the oil level gauge coupler.
9.
Install the right side cover and the shroud.
To change the engine oil (with or without oil fil-
ter cartridge replacement)
1.
Place the snowmobile on a level surface
and apply the parking brake.
2.
Start the engine, warm it up for several
minutes, and then turn it off.
3.
Remove the shroud, the left side cover,
the right side cover, and the drive guard.
(See pages 17 and 44 for removal proce-
dures.)
4.
Remove the left lower cover, the right
lower cover, and the bottom panel.
5.
Place an oil pan under the oil tank to col-
lect the used oil.
6.
Disconnect the oil level gauge coupler.
1.
Left lower cover
2.
Quick fastener
3. Bolt
4. Washer
3
1
2
2
4
3
1.
Right lower cover
2.
Quick fastener
3. Bolt
4. Washer
1.
Bottom panel
2.
Quick fastener
1.
Oil level gauge coupler
2.
Oil filler cap
2
2
3
1
4
3