2009 Yamaha Motorsports FX Nytro XTX Owners Manual - Page 30
2009 Yamaha Motorsports FX Nytro XTX Manual
Page 30 highlights
Control functions Compression damping setting: Minimum (soft): FX10RTRS 19 FX10XT 12 click(s) in direction (b)* Standard: FX10RTRS 10 FX10XT 6 click(s) in direction (b)* Maximum (hard): FX10RTRS 7 FX10XT 2 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) Rebound damping force The rebound damping force of each shock absorber can be adjusted by turning its rebound damping force adjusting knob. To increase the rebound damping force, turn the adjusting knob in direction (a). To decrease the rebound damping force, turn the adjusting knob in direction (b). FX10RTRS FX10XT 1. Rebound damping force adjusting knob Rebound damping setting: Minimum (soft): FX10RTRS 19 FX10XT 20 click(s) in direction (b)* Standard: FX10RTRS 10 FX10XT 11 click(s) in direction (b)* Maximum (hard): FX10RTRS 1 FX10XT 3 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) TIP The damping forces will not decrease past the minimum levels even if the adjusting knobs are turned out more than the minimum settings. ESU13132 1. Rebound damping force adjusting knob Adjusting the spring preload of the center shock absorber and the rear torsion springs The spring preload can be adjusted by turning the adjusting nut on the center shock absorber and the adjusters on the rear torsion springs. Adjust the spring preload as follows. 24