2009 Yamaha Motorsports FX Nytro XTX Owners Manual - Page 34
2009 Yamaha Motorsports FX Nytro XTX Manual
Page 34 highlights
Control functions 1 (b) (a) 1. Compression damping force adjusting screw Compression damping force setting: Minimum (soft): 12 click(s) in direction (b)* Standard: 6 click(s) in direction (b)* Maximum (hard): 2 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) ESU13013 Adjusting the control rods (FX10XT) EWS00770 1. Locknut 2. Control rod adjusting nut WARNING The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. The weight transfer can be adjusted by turning the adjusting nuts on the control rods. 1. Loosen the locknut while holding the adjusting nut. 2. To increase weight transfer, turn the adjusting nut in direction (a), and to decrease weight transfer, turn it in direction (b). WARNING! Never adjust the control rods beyond the maximum setting, indicated by red paint; otherwise, they could be damaged, which could lead to an accident or injury. [EWS00173] 28