2006 Yamaha Motorsports VK Professional Owners Manual - Page 81
2006 Yamaha Motorsports VK Professional Manual
Page 81 highlights
3. Move the handlebar up or down to adjust the handlebar height to the desired position. CAUTION: @ Make sure that the projection on the handlebar is not installed into the area a shown. @ 4. Tighten the handlebar bolts and install the handlebar cover. Handlebar bolt tightening torque: 14.5 Nm (1.45 m·kgf, 11 ft·lb) CAUTION: @ Make sure that the small gap b side of the handlebar holders faces forward c. @ 8-26
8-26
3. Move the handlebar up or down to adjust the handle-
bar height to the desired position.
CAUTION
:
@
Make sure that the projection on the handlebar is not
installed into the area
a
shown.
@
4. Tighten the handlebar bolts and install the handlebar
cover.
CAUTION
:
@
Make sure that the small gap
b
side of the handlebar
holders faces forward
c
.
@
Handlebar bolt tightening torque:
14.5 Nm (1.45 m·kgf, 11 ft·lb)