2006 Yamaha Motorsports VK Professional Owners Manual - Page 66

2006 Yamaha Motorsports VK Professional Manual

Get 2006 Yamaha Motorsports VK Professional PDF manuals and user guides View all 2006 Yamaha Motorsports VK Professional manuals

Page 66 highlights

11. Add 2.0 L (1.8 Imp qt, 2.1 US qt) of the recommended engine oil to the oil tank, and then install and tighten the oil level gauge/dipstick and the cylinder head cap. Recommended engine oil: See page 6-2. Oil quantity: With oil filter cartridge replacement: 3.0 L (2.6 Imp qt, 3.2 US qt) Without oil filter cartridge replacement: 2.8 L (2.5 Imp qt, 3.0 US qt) Total amount: 3.7 L (3.3 Imp qt, 3.9 US qt) 12. Start the engine, warm it up for several minutes, and then turn it off. 13. Add sufficient oil of the recommended type to raise it to the "F" level mark on the oil level gauge/dipstick. (See page 6-3 for the checking procedure.) CAUTION: @ G G @ When adding the engine oil, be careful not to fill above the "F" level mark on the oil level gauge/ dipstick. Make sure that no foreign material enters the engine oil tank. 14. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and make sure the engine oil drain bolts, cylinder head cap, and oil level gauge/dipstick are installed correctly. 15. Turn the engine off, connect the oil level gauge coupler, and then install the bottom panel and right side cover. CAUTION: @ If oil is leaking or the oil level warning indicator comes on when the engine is running, immediately turn the engine off and have a Yamaha dealer check the snowmobile. Continuing to operate the engine under such conditions could cause severe engine damage. @ 8-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
8-11
11. Add 2.0 L (1.8 Imp qt, 2.1 US qt) of the recom-
mended engine oil to the oil tank, and then install and
tighten the oil level gauge/dipstick and the cylinder
head cap.
12. Start the engine, warm it up for several minutes, and
then turn it off.
13. Add sufficient oil of the recommended type to raise it
to the “F” level mark on the oil level gauge/dipstick.
(See page 6-3 for the checking procedure.)
CAUTION
:
@
●
When adding the engine oil, be careful not to fill
above the “F” level mark on the oil level gauge/
dipstick.
●
Make sure that no foreign material enters the
engine oil tank.
@
14. Start the engine, and then let it idle for several min-
utes while checking it for oil leakage. If oil is leaking,
immediately turn the engine off and make sure the
engine oil drain bolts, cylinder head cap, and oil level
gauge/dipstick are installed correctly.
15. Turn the engine off, connect the oil level gauge cou-
pler, and then install the bottom panel and right side
cover.
CAUTION
:
@
If oil is leaking or the oil level warning indicator
comes on when the engine is running, immediately
turn the engine off and have a Yamaha dealer check
the snowmobile. Continuing to operate the engine
under such conditions could cause severe engine
damage.
@
Recommended engine oil:
See page 6-2.
Oil quantity:
With oil filter cartridge replacement:
3.0 L (2.6 Imp qt, 3.2 US qt)
Without oil filter cartridge replacement:
2.8 L (2.5 Imp qt, 3.0 US qt)
Total amount:
3.7 L (3.3 Imp qt, 3.9 US qt)