2006 Yamaha Motorsports VK Professional Owners Manual - Page 80

2006 Yamaha Motorsports VK Professional Manual

Page 80 highlights

CAUTION: @ The right and left adjusters should be turned to an equal amount. @ 6. Recheck alignment and deflection. If necessary, repeat steps 3 to 5 until the proper adjustment is achieved. 7. Tighten the rear axle nut. Rear axle tightening torque: 80 Nm (8.0 m·kgf, 58 ft·lb) ESU02001 Aligning the skis 1. Turn the handlebar so the skis face straight ahead. 2. Check the following for ski alignment: a. Skis are facing forward. b. Ski toe-out (1 - 2) is within specification. Ski toe-out (1 - 2): 0-15 mm (0-0.59 in) 3. If the alignment is not correct, consult a Yamaha dealer. ESU03543 Adjusting the handlebar 1. Remove the handlebar cover 1. 2. Loosen the handlebar bolts. 8-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98

8-25
CAUTION
:
@
The right and left adjusters should be turned to an
equal amount.
@
6. Recheck alignment and deflection. If necessary,
repeat steps 3 to 5 until the proper adjustment is
achieved.
7. Tighten the rear axle nut.
ESU02001
Aligning the skis
1. Turn the handlebar so the skis face straight ahead.
2. Check the following for ski alignment:
a. Skis are facing forward.
b. Ski toe-out (
1
2
) is within specification.
3. If the alignment is not correct, consult a Yamaha
dealer.
ESU03543
Adjusting the handlebar
1. Remove the handlebar cover
1
.
2. Loosen the handlebar bolts.
Rear axle tightening torque:
80 Nm (8.0 m·kgf, 58 ft·lb)
Ski toe-out (
1
2
): 0–15 mm (0–0.59 in)