2006 Yamaha Motorsports VK Professional Owners Manual - Page 33
2006 Yamaha Motorsports VK Professional Manual
Page 33 highlights
To remove the passenger seat and backrest 1. Open the rider seat. (See "Storage compartment" for details.) 2. Remove the passenger seat bolts, slide the passenger seat and backrest slightly rearward, and then lift them straight up to remove them. 3. Install the passenger seat bolts, and then tighten them to the specified torque. 1 Passenger seat bolt 2 Passenger seat and backrest Passenger seat bolt tightening torque: 47.5 Nm (4.75 m·kgf, 34 ft·lb) CAUTION: @ When using the rear storage area, do not load any cargo that is too large for it. In addition, cargo must not project from the edges of the rear storage area. @ To install the passenger seat and backrest 1. Open the rider seat. (See "Storage compartment" for details.) 2. Remove the passenger seat bolts, insert the hooks on the bottom of the passenger seat and backrest into the slots in the rear storage area, and then slide the seat and backrest forward. CAUTION: @ Make sure that the wire harness is not pinched when installing the passenger seat and backrest. @ 3. Install the passenger seat bolts, and then tighten them to the specified torque. 5-15