2008 Polaris Sportsman 800 EFI Touring Owners Manual - Page 116

2008 Polaris Sportsman 800 EFI Touring Manual

Get 2008 Polaris Sportsman 800 EFI Touring PDF manuals and user guides View all 2008 Polaris Sportsman 800 EFI Touring manuals

Page 116 highlights

MAINTENANCE PVT System When To Use Low Range and High Range Condition Operating at speeds less than 7 MPH (11 km/h) Towing heavy loads Operating in rough terrain (swamps, mountains, etc.) Operating at speeds greater than 7 MPH (11 km/h) Range to Use Low Low Low High PVT Drying There may be some instances when water is accidently ingested into the PVT system. Use the following instructions to dry it out before operating. 1. Position the vehicle on a level surface. 2. Remove the drain plug. Allow the water to drain completely. Reinstall the drain plug. 3. Start the engine. Place the transmission in PARK. 4. Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the belt and clutches. NOTE: Do not hold the throttle wide open for more than 10 seconds. 5. Allow the engine RPM to settle to idle speed, then shift the transmission to the lowest available range. 6. Test for belt slippage. If the belt slips, repeat the process. 7. Take the vehicle to your dealer for service as soon as possible. 116

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
116
MAINTENANCE
PVT System
When To Use Low Range and High Range
PVT Drying
There may be some instances when water is accidently ingested into the
PVT system. Use the following instructions to dry it out before operat-
ing.
1.
Position the vehicle on a level surface.
2.
Remove the drain plug. Allow the water to drain completely. Rein-
stall the drain plug.
3.
Start the engine. Place the transmission in PARK.
4.
Apply varying throttle for 10-15 seconds to expel the moisture and
air-dry the belt and clutches.
NOTE:
Do not hold the throttle wide open for more than 10 seconds.
5.
Allow the engine RPM to settle to idle speed, then shift the trans-
mission to the lowest available range.
6.
Test for belt slippage. If the belt slips, repeat the process.
7.
Take the vehicle to your dealer for service as soon as possible.
Condition
Range to Use
Operating at speeds less than 7 MPH (11 km/h)
Low
Towing heavy loads
Low
Operating in rough terrain (swamps, mountains, etc.)
Low
Operating at speeds greater than 7 MPH (11 km/h)
High