2008 Polaris Sportsman 800 EFI Touring Owners Manual - Page 106

2008 Polaris Sportsman 800 EFI Touring Manual

Get 2008 Polaris Sportsman 800 EFI Touring PDF manuals and user guides View all 2008 Polaris Sportsman 800 EFI Touring manuals

Page 106 highlights

MAINTENANCE Lights When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. WARNING Poor lighting while driving can result in severe injury or death. Headlight and taillight lenses become dirty during normal operation. Wash the headlights frequently to maintain lighting quality. Hot components can cause serious burns to skin. Allow lamps to cool before servicing. Headlight Lamp Replacement 1. Remove the two screws on the lower front corners of the headlight pod. 2. Remove the screw from the rear of the pod. 3. Lift the pod slightly while depressing the tabs at the rear of the pod. 4. Lift the pod cover and disconnect the speedometer harnesses from the speedometer. 5. Unplug the headlamp from the wiring harness. Be sure to pull on the connector, not on the wiring. 6. Turn the lamp counterclockwise to remove it. 7. Apply dielectric grease to the socket and install the new lamp. NOTE: Make sure the tab on the lamp locates properly in the housing. 8. Reassemble the pod. 106

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
106
MAINTENANCE
Lights
When servicing a halogen lamp, don't touch the lamp with bare fingers.
Oil from your skin leaves a residue, causing a hot spot that will shorten
the life of the lamp.
Headlight Lamp Replacement
1.
Remove the two screws on the lower front corners of the headlight
pod.
2.
Remove the screw from the rear of the pod.
3.
Lift the pod slightly while depressing the tabs at the rear of the pod.
4.
Lift the pod cover and disconnect the speedometer harnesses from
the speedometer.
5.
Unplug the headlamp from the wiring harness. Be sure to pull on the
connector, not on the wiring.
6.
Turn the lamp counterclockwise to remove it.
7.
Apply dielectric grease to the socket and install the new lamp.
NOTE:
Make sure the tab on the lamp locates properly in the housing.
8.
Reassemble the pod.
WARNING
Poor lighting while driving can result in severe injury or death. Headlight and
taillight lenses become dirty during normal operation. Wash the headlights
frequently to maintain lighting quality.
Hot components can cause serious burns to skin. Allow lamps to cool before
servicing.