2008 Polaris Sportsman 800 EFI Touring Owners Manual - Page 110
2008 Polaris Sportsman 800 EFI Touring Manual
Page 110 highlights
MAINTENANCE Spark Plugs Spark Plug Recommendations CAUTION Using non-recommended spark plugs can result in serious engine damage. Always use Polaris-recommended spark plugs. Refer to the specifications section beginning on page 138 for the recommended spark plug type and gap for your vehicle. Torque spark plugs to specification. Plug Condition New Spark Plug Previously Installed Spark Plug Torque Specification 9-11 ft. lbs. (12-15 Nm) 17-20 ft. lbs. (23-27 Nm) Spark Plug Inspection Spark plug condition is indicative of engine operation. Check the spark plug firing end condition after the engine has been warmed up and the vehicle has been driven at higher speeds. Immediately check the spark plug for correct color. See page 111. WARNING A hot exhaust system and engine can cause serious burns. Wear protective gloves when removing a spark plug for inspection. 1. Rotate the spark plug cap 1/4 turn and pull it off the spark plug. 2. Using the special wrench provided in the tool pouch, rotate the spark plug counterclockwise to remove it. 3. Reverse the procedure for spark plug installation. Torque to specification. 110
![](/manual_guide/autos/2008-polaris-sportsman-800-efi-touring-owners-manual-3101665/110.png)