2008 Polaris Kingpin Tour Owners Manual - Page 94
2008 Polaris Kingpin Tour Manual
Page 94 highlights
Engine Oil MAINTENANCE Change Engine Oil and Oil Filter 8. Make sure the new oil filter gasket is properly seated in the oil filter, and apply a thin film of clean engine oil to the gasket. Screw the new filter on until the gasket contacts the filter mounting plate. Tighten the filter by hand an additional 3/4 turn. 9. Fill the crankcase through the oil fill cap with about 8.75-9.0 pints (4.0-4.25 liters) of oil. We recommend the use of only VICTORY Brand Semi-Synthetic 20W-40 Motor Oil or an equivalent oil designed for use with wet clutches (such as those with a JASO MA rating). 10. Reinstall the oil fill cap and then start and run the engine until it reaches normal operating temperature. Caution After an oil change, the low oil pressure indicator remains illuminated longer than usual before going out. Revving the engine while the low oil pressure indicator is illuminated can damage the engine. 11. Stop the engine and make sure there are no leaks around the drain plug and oil filter. Check the oil level and adjust if needed. Notice Recycle used oil and oil filter in accordance with local regulations. 89