2008 Polaris Hammer Owners Manual - Page 91
2008 Polaris Hammer Manual
Page 91 highlights
MAINTENANCE Drive Belt Check Drive Belt Condition NOT attempt to check belt tension if the belt has been exposed to rain or washing within a 24 hour period or if the belt is hot from riding. Allow the belt to cool down to ambient temperature before measuring belt tension. To obtain the maximum drive belt service life possible, Victory recommends the replacement of both sprockets as a set if the drive belt system has over 5,000 miles (8,000 km) of service at the time of damage or failure. Replace the drive belt if it is cracked or has broken teeth or frayed edges. No matter its condition, the drive belt should be replaced at periodic intervals (see the VICTORY Service Manual or an authorized VICTORY dealer). DO Check Drive Belt Tension This procedure involves using the belt tension gauge, part no. PV-43532, which is designed specifically for measuring drive belt tension. Before beginning this procedure: S Make sure the drive belt is dry and at room temperature. S Make sure the rear suspension is properly adjusted (see Adjust Rear Shock Absorber, page 94). 3 1. 2. 3. 4. Belt Tension Gauge Small O-Ring Base Plunger 1 2 4 86