2005 Polaris Ranger 6x6 Owners Manual - Page 89

2005 Polaris Ranger 6x6 Manual

Page 89 highlights

MAINTENANCE AND LUBRICATION Seat Belts Inspect all three seat belts for proper operation before each use of the vehicle. 1. Push the latch plate into the buckle until it clicks. The latch plate must slide smoothly into the buckle. A click indicates that it's securely latched. 2. Push the red button in the middle of the buckle to make sure it releases freely. 3. Check the belt webbing for wear, cuts or damage. If any irregularities are found, have the seat belt system checked and/or replaced by an authorized Polaris dealer. The RANGER seat belt is adjustable and should be adjusted for both the operator and passenger before driving. Although having the belt at 30q is typical for many people, it will not accommodate all body sizes and shapes. Make sure the seat belt is adjusted to the lowest possible lap position before riding. 1. To adjust, loosen the bolts (1). 2. Reposition both the buckle and retractor. Tighten the bolts. NOTE: The center belt does not self adjust. Before riding, pull on the strap to secure the belt on the lap of the center passenger. 1 WARNING Failure to follow the age recommendations for this vehicle could result in serious injury or death. No one under the age of 16 may operate this vehicle. No one under the age of 5 may ride as a passenger in this vehicle. 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121

87
MAINTENANCE AND LUBRICATION
Seat Belts
Inspect all three seat belts for proper operation before each use of the
vehicle.
1.
Push the latch plate into the buckle until it clicks. The latch plate
must slide smoothly into the buckle. A click indicates that it’s
securely latched.
2.
Push the red button in the middle of the buckle to make sure it
releases freely.
3.
Check the belt webbing for wear, cuts or damage. If any
irregularities are found, have the seat belt system checked and/or
replaced by an authorized Polaris dealer.
The
RANGER
seat belt is adjustable and
should be adjusted for both the operator
and passenger before driving. Although
having the belt at 30
q
is typical for many
people, it will not accommodate all body
sizes and shapes.
Make sure the seat belt
is adjusted to the lowest possible lap
position before riding.
1.
To adjust, loosen the bolts (1).
2.
Reposition both the buckle and
retractor. Tighten the bolts.
NOTE:
The center belt does not self
adjust. Before riding, pull on the
strap to secure the belt on the lap
of the center passenger.
WARNING
Failure to follow the age recommendations for this vehicle could
result in serious injury or death. No one under the age of 16 may
operate this vehicle. No one under the age of 5 may ride as a
passenger in this vehicle.
1