2005 Polaris Ranger 6x6 Owners Manual - Page 69
2005 Polaris Ranger 6x6 Manual
Page 69 highlights
MAINTENANCE AND LUBRICATION Gearcases Transmission (Main Gearcase) Always check and change the transmission oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 54. Maintain the oil level even with the bottom of the fill plug hole. We recommend the use of Premium AGL Synthetic Gearcase Lubricant. See page 99 for the part numbers of Polaris products. Oil Check 1. Position the vehicle on a level surface. 2. Remove the fill plug (1), which is located on the rear of the vehicle. 3. Check the oil level and add as needed. 4. Reinstall the fill plug. Torque to specification. See page 66. 1 Oil Change The drain plug (2) is located on the bottom of the transmission. Access the drain plug through the drain hole in the skid plate. 1. Remove the fill plug. 2. Remove the drain plug and drain the oil into a drain pan. Dispose of used oil properly. 3. Wipe the magnetic end of the drain plug clean to remove accumulated metallic filings. 4. After the oil has drained completely, install a new sealing washer and reinstall the drain plug. Torque to specification. See page 66. NOTE: 2 Refer to the Gearcase Specifications Chart on page 66. 5. Add the recommended oil as needed. Do not overfill. 6. Reinstall the fill plug. Torque to specification. 7. Check for leaks. 67
![](/manual_guide/autos/2005-polaris-ranger-6x6-owners-manual-6928e1d/69.png)