2006 Honda Ridgeline Owner's Manual - Page 247
2006 Honda Ridgeline Manual
Page 247 highlights
Lights 6. Install the new bulb into the socket. 7. Push the socket into the light assembly, and turn it clockwise until it locks. 8. Turn on the lights to make sure the new bulb is working. 9. Install the rear light assembly in the rear pillar. Tighten the two bolts. securely. LENS SEGMENT Replacing a High-mount Brake Light Bulb 1. Place a cloth on the edge of the lens segment. Remove each lens segment by carefully prying on its edge with a small flat-tipped screwdriver. 2. Remove the screw under each lens. 3. Pull the high-mount brake light assembly out of the vehicle. 4. Remove the three mounting screws from the light assembly. 5. Remove the lens from the light assembly. 6. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 248