2013 Ducati Hypermotard Hyperstrada Owners Manual - Page 226
2013 Ducati Hypermotard Hyperstrada Manual
Page 226 highlights
Performance data Maximum speed in any gear should be reached only after a correct running-in period with the motorcycle properly serviced at the recommended intervals. Failure to follow these instructions will release Ducati Motor Holding S.p.A. from any liability for any engine damage or shortened engine life. Important The vehicle is compatible only with fuel having a maximum content of ethanol of 10% (E10). Using fuel with ethanol content over 10% is prohibited. Using it could result in severe damage of the engine and motorcycle components. Using fuel with ethanol content over 10% will render the Warranty null and void. Attention Brakes Spark plugs Make: NGK Type: MAR9A-J Separate-action anti-lock brake system operated by hall-type sensors mounted to each wheel with phonic wheel detection: ABS can be disabled. FRONT Semi-floating drilled twin-disc. Braking material: steel. Carrier material: black steel. Disc diameter: 12.60 in (320 mm). Hydraulically operated by a control lever on handlebar right-hand side. Brake caliper make: BREMBO. Type: M4.3 pistons. Friction material: TT 2182 FF. Master cylinder type: PS 16/22. REAR 225 Fuel system MARELLI indirect electronic injection. Throttle body with full Ride-by-Wire with circular section diameter of 2.04 in (52 mm). Injectors per cylinder: 1. Firing points per injector: 4. Fuel with a minimum octane rating of 90 (RON +MON)/2.