2013 Ducati Hypermotard Hyperstrada Owners Manual - Page 206
2013 Ducati Hypermotard Hyperstrada Manual
Page 206 highlights
Beam setting The headlight features a double beam adjustment, one for the right beam and one for the left beam To check the headlight aim, place the motorcycle upright with the tires inflated to the correct pressure and one person sitting astride the motorcycle. The motorcycle should be perfectly vertical, with its longitudinal axis at right angles to a wall or screen at a distance of 32.8 feet (10 meters). Draw a horizontal line corresponding to the center of the headlamp and a vertical one in line with the longitudinal axis of motorcycle. If possible, perform this check in dim light. Switch on the low beam and adjust the aiming of the left and right-hand beams. The height of the upper limit between the dark area and the lit area must not be more than nine tenths of the height from ground of headlight center. Note 9 x 10 10 m 32.8 ft x Fig 160 The procedure described here is in compliance with the Italian Standard establishing the maximum height of the light beam. Owners in other countries will adapt said procedure to the provisions in force in their countries. Note 205