Xerox C2424 User Guide Section 4: Scanning - Page 10

Adjusting Scanning Options Setting a Scan Password for Your Computer (Windows Only) You can prevent others from scanning images directly to your computer by setting a password. The control panel will prompt users for the password when they select your computer as the scan destination. Use the Xerox Scan Utility to set a scanning password for your computer. 1. Right-click the icon on the taskbar (in the lower-right corner of your screen), then select Xerox Scan Utility on the popup menu. Note If the icon is not in the taskbar, select the Windows Start menu, select Programs, select Xerox Office Printing, select Scanning, and then select Xerox Scan Utility. 2. In the Location drop-down box, select My Scanned Images. 3. From the Settings menu, select Scan to PC. 4. Enter the desired 4-digit numeric password in each of the password boxes. 5. Click the OK button. Note See "Using the Xerox Scan Utility (Windows Only)" on page 4-13 for more information about the Xerox Scan Utility. See "Setting the Scan Destination" on page 4-6 for more information about scanning images to your computer. Calibrating the Scanner Perform the scanner calibration procedure if you replace your original scanner or document feeder. Scanner calibration adjusts the output quality of the front and back pages of 2-sided originals in relation to each other. This procedure should not need to be performed as part of normal system operation. For more information about calibrating the scanner, go to the Xerox infoSMART Knowledge Base at www.xerox.com/office/c2424infoSMART. WorkCentre® C2424 Copier-Printer 4-10