Xerox 6180N Using LCDS Print Description Language - Page 400

Using Dynamic Job Descriptor Entries (DJDEs) Syntax INKINDEX = {offset, [ZERO | ONE] [, bitopt] | NONE} Options Table 5-35. INKINDEX DJDE options and definitions Option offset ZERO ONE bitopt NONE Definition Indicates the byte offset in the data record where the ink index number is located. Specifies that the first ink in the list is referenced with an index value of 0. Specifies that the first ink in the list is referenced with an index value of 1. bit option Specifies the number of bits that should be used in calculating the ink index. The range is 1 through 7. The default bitopt value is 4. Specifies that there is no ink index. INKINDEX DJDE: point to note If inks are used: • If one inkref in the list is omitted, commas must be used as place holders to maintain the relative positioning of the remaining ink references. • If more than two ink references are specified, the additional ink references are ignored. INVERT DJDE Specifies that the subsequent page content will be inverted 180 degrees when printed on the physical page. Portrait oriented text is printed as inverse portrait, landscape text is printed as inverse landscape, and vice versa. Type Page oriented Syntax INVERT = {FRONT | BACK | BOTH | NONE} 5-46 Using LCDS Print Description Language