Xerox 6180N Using LCDS Print Description Language - Page 268

Specifying print format parameters LINE FONTINDEX Specifies that a field within the user portion of a record defines the index to a specific font to be used for that line. If FONTINDEX is not specified, no index is used. Syntax LINE FONTINDEX = {offset | (offset [, initval [, bitopt]]) | NONE} Options Table 4-30. LINE FONTINDEX parameter options and definitions Option offset initval bitopt NONE Definition Specifies the byte offset in the data record where the character that is to be used as a font index number is located. Refer to "LINE OVERPRINT" later in this chapter for a discussion of FONTINDEX usage with overprint lines and maximum number of fonts. initial value. Index number associated with the first font in the font list (i.e., the number the font list starts with). This value can be one of the following: • ONE specifies that an index value of 1 is associated with the first font in the font list. • ZERO specifies that an index value of 0 is associated with the first font in the font list, an index value of 1 is associated with the second font in the font list, and so forth. The default for the initial font index value is ONE. bit option A number specifying the number of low order bits within the font index byte, which, in turn, specifies an index value into the font list of the current PDE. The bitopt value may be 1 through 7. The default bitopt value is 4. Specifies that there is no font index. Default NONE 4-28 Using LCDS Print Description Language