Xerox 6180N Using LCDS Print Description Language - Page 215

Using logical processing Figure 3-3. Data record showing offset specified in RAUX command The data record, when processed as part of the input data stream, causes the page it is a part of to be printed on a sheet of paper fed from the auxiliary tray. The Xs are depicted in the above example only to illustrate the specified offset of 20 character positions. RDELETE and RSELECT commands Records that are interspersed throughout one report or file may be either deleted or selected for printing by the RDELETE and RSELECT commands, respectively. These commands can also be used to selectively delete specialized records; for example, control records and offset records that are on the data tape but are not printed. If the tests for both RSELECT and RDELETE are satisfied, the records are deleted. The following section describes the syntax of the RDELETE and RSELECT command parameters and explains their options. RSELECT and RDELETE TEST parameter Defines the test expression for selection (RSELECT) or deletion (RDELETE) of records for printing. Syntax RDELETE TEST = testexp RSELECT TEST = testexp Using LCDS Print Description Language 3-35