Xerox 6180N Using LCDS Print Description Language - Page 320
Options, Default, OUTPUT SIZING, parameter: points, to note, Table 4-73. OUTPUT SIZING parameter
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 320 highlights
Specifying print format parameters Options Table 4-73. OUTPUT SIZING parameter options and definitions Option Definition SEMIAUTO (Standard mode of operation.) Causes the printer to stop printing when there is a paper size mismatch. For the printer to resume printing, the operator must do one of the following: • Resume printing to print the job on the next larger size paper. • Change the paper or the effective stock. • Cancel the job. If Continue is selected, the system ignores further mismatches of this type until one of the following occurs: • The STOCKS parameter changes. • The end of the report is detected, and no STOCKS parameter is in effect. • The end of the print job is reached. • The printer stops printing. STOP Causes the printer to cycle down if the exact paper size is not available. To resume operation, the operator must do one of the following: • Load the proper size paper and resume printing. • Cancel the report. BEST On the FreeFlow Print Server LCDS systems, this parameter functions the same as SEMIAUTO. EXACT On the FreeFlow Print Server LCDS systems, this parameter functions the same as STOP. Default SEMIAUTO OUTPUT SIZING parameter: points to note • A paper size is considered equal in size to another paper size if neither dimension differs by more than 15/600 of an inch. • Use this command to print on paper larger than the specified paper size. Data may be lost if the paper size is smaller than the image size. • Note that A4 paper is treated as smaller than 8.5 by 11 inch paper because it is narrower. • Regardless of the parameter selected, if an exact match in paper size is found, the matching tray is used. The parameters differ only when no match is found. 4-80 Using LCDS Print Description Language