Viper 3303 Owner Manual - Page 40
Programming - sensor adjust
View all Viper 3303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
can be performed by pressing one of the command buttons. Programming To enter; hold the button for 8 seconds until the transmit LED turns on, the programming main menu has been accessed (If programmed to operate two systems, ignore the transmit LED flashes at 3 seconds). To exit; press and release the button to go back and repeat to exit. The transmit LED turns off when programming is exited. Sensor Adjust The button is used for sensor adjustment, to avoid unintended alarm triggers, it is recommended that an authorized Directed dealer perform all sensor adjustments. Remote Features Menu Press and release the button, 2 transmit LED flashes indicate the remote features menu is accessed and can be set. Press the buttons indicated below, 1 flash turns the feature on, 2 flashes turns the feature off. s Autolock feature: Press to turn on/off. s Car 2 feature: Press to turn on/off. Remote Learning Press the button,3 transmit LED flashes indicates the remote is ready to program to the system. Per the instruction in Pair the Responder LC remote control under the Main Menu section of this guide, following step 3 of Prepare the system. Press and hold the button, the siren emits one long chirp to confirm the remote has been learned. © 2009 Directed Electronics. All rights reserved. 37