Viper 3303 Owner Manual - Page 33
Alarm Report when Requested, Nuisance Prevention NPC
View all Viper 3303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Zone # (led flashes) 1 2 3 4 5 6 7 Table of Zones Zone Name Trunk Shock Sensor Door Sensor 2 Ignition Hood Sensor 3 Alarm Report when Requested The alarm report displays the two most recent alarm triggers depending on the system state when requested. When disarmed, the report will display text to identify the two most recent triggers since the vehicle was last driven. When armed, the report will display text to identify the two most recent triggers since the system was armed. Note The Alarm Report clears when ignition is turned on. Nuisance Prevention (NPC) NPC monitors all alarm zones and, if any are triggered excessively, bypasses them until corrected. If a point of entry (trunk, hood, door) is left open following a forced entry, it is bypassed. It becomes active again only after being closed. Bypassed sensors automatically reset after one hour and after the vehicle is driven. Disarming then re-arming the alarm does not reset bypassed sensors. 30 © 2009 Directed Electronics. All rights reserved.