Viper 3303 Owner Manual - Page 37
Vehicle Recovery System VRS
View all Viper 3303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Vehicle Recovery System (VRS) In case your vehicle is stolen or carjacked, VRS sounds the siren and flashes the parking lights to persuade the thief to abandon the vehicle, and when the ignition is turned off, activates the starter kill to prevent the engine from restarting. To arm VRS, perform the silent arm command while driving, or while the ignition is turned on. The siren chirps and parking lights flash once to confirm arming. The ARMED text and beeps play, and the system status icons update to confirm arming. If valet mode is on, the NOT AVAILABLE text and tone plays, exit valet mode before arming VRS. Once armed, VRS triggers if any door is opened then closed while the ignition remains on, and if the vehicle is parked while armed, VRS triggers when driving resumes. See trigger description below. When triggered, the control center LED begins flashing after fifteen seconds. Within 45 seconds perform the silent disarm command to disarm VRS. If not disarmed, the siren begins chirping for 60 seconds and then becomes a constant siren blast with flashing parking lights for several minutes. This output will continue and be repeated each time the ignition is turned on until VRS is disarmed. To disarm, perform the silent disarm command anytime before VRS has been triggered, or within one minute after it has triggered and before the siren begins to chirp. If not disarmed before the siren begins to chirp, the emergency override procedure must be used to disarm VRS. 34 © 2009 Directed Electronics. All rights reserved.