TRENDnet TEW-826DAP Users Guide

TRENDnet TEW-826DAP Manual

Get TRENDnet TEW-826DAP PDF manuals and user guides View all TRENDnet TEW-826DAP manuals
Add to My Manuals
Save this manual to your list of manuals

TRENDnet TEW-826DAP manual content summary:

  • TRENDnet TEW-826DAP | Users Guide - Page 1
    TRENDnet User's Guide Cover Page
  • TRENDnet TEW-826DAP | Users Guide - Page 2
    TRENDnet User's Guide Table of Contents Product Overview 1 Package Contents ...1 Features ...1 Product Hardware for your wireless network 24 General Configuration 25 Secure your wireless network 25 Roaming Support (802.11k 27 Wireless Bandwidth Control 27 RSSI Scanner ...28 Wireless MAC filter
  • TRENDnet TEW-826DAP | Users Guide - Page 3
    TRENDnet User's Guide Repeater: manually set 48 Schedules ...49 SSH Management ...50 Log ...50 Diagnostics...51 Ping Test Parameter 51 Traceroute Parameter 51 Download Technical Support Specifications 59 Troubleshooting 62 Appendix 63 © Copyright 2018 TRENDnet. All Rights Reserved. ii
  • TRENDnet TEW-826DAP | Users Guide - Page 4
    TRENDnet User's Guide Product Overview TEW-826DAP Features TRENDnet's high performance AC2200 Tri-Band PoE+ Indoor Wireless Access Point, model TEW-826DAP, features three concurrent WiFi bands to maximize device networking speeds: two separate high performance 802.11ac networks (5GHz1: 867Mbps /
  • TRENDnet TEW-826DAP | Users Guide - Page 5
    TRENDnet User's Guide Tri-Band WiFi AC2200 Tri-Band: 867Mbps (5GHz1) + 867Mbps (5GHz2) + 400Mbps (2.4GHz) bands Power over Ethernet (PoE+) Saves installation time and costs with gigabit PoE+ support (optional power port for non-PoE+ installations) WiFi Operation Modes The WiFi access point supports
  • TRENDnet TEW-826DAP | Users Guide - Page 6
    TRENDnet User's Guide Product Hardware Features Low-profile housing PWR LAN1 LAN2 2.4GHz 5GHz 1 5GHz 2 TEW-826DAP  PWR: This indicator is enabled. The LED indicator blinks during data transmission. © Copyright 2018 TRENDnet. All Rights Reserved. Reset button Power button Power port LAN2 LAN1 (
  • TRENDnet TEW-826DAP | Users Guide - Page 7
    TRENDnet User's Guide Getting Started Quick Reference Note: By default, the wireless network name/SSID and wireless encryption settings point will use the default IP address settings 192.168.10.100 / 255.255.255.0. Application Diagram TEW-826DAP © Copyright 2018 TRENDnet. All Rights Reserved. 4
  • TRENDnet TEW-826DAP | Users Guide - Page 8
    TRENDnet User's Guide Basic Setup Note: It is strongly TEW-826DAP access point. 4. Verify your connection to you network by accessing the Internet. For advanced configuration continue to the advanced sections of the user manual. (see "Access the management page" on page 8) © Copyright 2018 TRENDnet
  • TRENDnet TEW-826DAP | Users Guide - Page 9
    TRENDnet User's Guide Hardware Installation To mount the access point, first route the Finally, install the cable guard by sliding it onto the mounting plate until it locks into place. TEW-826DAP Steps to improve wireless connectivity There are a number of factors that can impact the range of
  • TRENDnet TEW-826DAP | Users Guide - Page 10
    refer to the User's Manual/Guide of your wireless client device to determine how to search and connect to this access point's wireless network. See the "Appendix" on page 62 for general information on connecting to a wireless network. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP 7
  • TRENDnet TEW-826DAP | Users Guide - Page 11
    TRENDnet User's Guide Initial Setup Access the management page Note: Your access point management page URL/domain name http://TEW-826dap or IP address (default: http://192.168.10.100) is accessed through the use of your Internet web browser (e.g. Internet Explorer, Firefox, Chrome, Safari, Opera)
  • TRENDnet TEW-826DAP | Users Guide - Page 12
    TRENDnet User's Guide 2. Your new password settings will be applied and you will be redirected to the login screen. You will need to use the new login password to proceed. TEW-826DAP by navigating to http://www.trendnet.com/support and selecting model TEW-826DAP within the Product Download drop-
  • TRENDnet TEW-826DAP | Users Guide - Page 13
    TRENDnet User's Guide  Product Name: Displays the device model  IP Mode: Select the IP mode to apply on the device o DHCP: Select this option to allow the device to receive IP address from your DHCP server o Static: Select this option to manually 2018 TRENDnet. All Rights Reserved. TEW-826DAP 10
  • TRENDnet TEW-826DAP | Users Guide - Page 14
    TRENDnet User's Guide Status Main Status > Main This section displays the status and  Network: Following table displays the network information of this device. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP o MAC Address: Displays this device's LAN MAC address. o IP Address: Displays
  • TRENDnet TEW-826DAP | Users Guide - Page 15
    TRENDnet User's Guide Wireless Client List Note: this status page will change depending , and click on 2.4G Wireless Client List, 5G1 Wireless Client List, and 5G2 Wireless Client List. TEW-826DAP  Mode-Displays the wireless mode of the connected client.  Rate-Displays the wireless link rate of
  • TRENDnet TEW-826DAP | Users Guide - Page 16
    TRENDnet User's Guide System Log Status > System Log System log keeps track of changes made to the access point. 1. Log into your management page (see "Access the management page" on page 8). 2. Click on the Status tab and click System Log. TEW-826DAP IPv6 Status Status > IPv6 Status This section
  • TRENDnet TEW-826DAP | Users Guide - Page 17
    TRENDnet User's Guide System Wizard System > Wizard You are able to set a new management page (see "Access the management page" on page 8). 2. Click on System and Wizard. TEW-826DAP Operation Mode System > Operation Mode This section outlines the available operating modes available on the access
  • TRENDnet TEW-826DAP | Users Guide - Page 18
    TRENDnet User's Guide  Save & Apply step saves and applies all configuration changes. TEW-826DAP IP Settings System > IP Settings In most cases, you do an IP address from your DHCP server o STATIC: Select this option to manually assign and IP address to your access point  DNS Server: Enter your
  • TRENDnet TEW-826DAP | Users Guide - Page 19
    TRENDnet User's Guide Spanning Tree Settings System > Spanning Tree Settings 1. Log into your management Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. TEW-826DAP Band Steering System > Band Steering When 2.4GHz and both 5GHz bands are all using the
  • TRENDnet TEW-826DAP | Users Guide - Page 20
    TRENDnet User's Guide TEW-826DAP  LAN IPv6 Address: Enter the IPv6 IP address provided to you by your Internet Service Service Provider (ISP)  Use the following IPv6 DNS Servers: Selecting this option enables you to manually input the Primary and Secondary DNS Servers © Copyright 2018 TRENDnet
  • TRENDnet TEW-826DAP | Users Guide - Page 21
    TRENDnet User's Guide shops and other WiFi hot spots. The access points supports both captive portal authentication through the built-in user account Portal. 3. Choose the Captive Portal mode Captive Port with RADIUS. TEW-826DAP 4. Check the Enable option for the Enable Captive Portal setting to
  • TRENDnet TEW-826DAP | Users Guide - Page 22
    TRENDnet User's Guide  Secondary RADIUS Server - If you have secondary or backup CoovaChilli Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. TEW-826DAP 2. Click on the System tab and click Captive Portal. 3. Choose the Captive Portal mode
  • TRENDnet TEW-826DAP | Users Guide - Page 23
    TRENDnet User's Guide  Single password - Requires users to enter a single password to Setting Single Password, enter the new password or click Generate to randomly generate a new password. TEW-826DAP  After your users authenticate and connect to your captive portal WiFi network, you may want to
  • TRENDnet TEW-826DAP | Users Guide - Page 24
    TRENDnet User's Guide PNG, GIF. Maximum file size for images is 250KB. TEW-826DAP After you have uploaded your images, you can add a welcome TRENDnet. All Rights Reserved. Additionally, you can modify the text displayed to your users for your terms of service. By default, a generic terms of service
  • TRENDnet TEW-826DAP | Users Guide - Page 25
    TRENDnet User's Guide To apply captive portal authentication to a wireless SSID, under 2.4G click Save at the bottom of the page to save the settings. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP  Redirect - Enables the redirect URL captive portal function.  Redirect URL - This is
  • TRENDnet TEW-826DAP | Users Guide - Page 26
    TRENDnet User's Guide Airtime Fairness System > Airtime Fairness This is an optional setting that will provide higher speed WiFi clients on Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP 23
  • TRENDnet TEW-826DAP | Users Guide - Page 27
    disconnect to the network and a wireless client with WPA2 encryption connects your wireless network will then change to WPA2 encryption. TEW-826DAP Note: WPA2 encryption supports 802.11n speeds and WPA encryption will limit your connection speeds to 54Mbps  WPA2: This is the most secure wireless
  • TRENDnet TEW-826DAP | Users Guide - Page 28
    TRENDnet User's Guide General Configuration The following section details general configurations of Access the management page" on page 8). 2. Click on the Wireless 2.4GHz, 5GHz1, or 5GHz2. TEW-826DAP 5. Select from the drop-down list to the wireless security to configure. Selecting WEP-OPEN, WEP-
  • TRENDnet TEW-826DAP | Users Guide - Page 29
    TRENDnet User's Guide  Network Key when the network passphrase will rotate. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP Note: It is recommended to use the default interval Also known as called Remote Authentication Dial-In User Service or RADIUS. Note: This security type requires an
  • TRENDnet TEW-826DAP | Users Guide - Page 30
    TRENDnet User's Guide Roaming Support (802.11k) Wireless (2.4GHz, 5GHz1, or 5GHz2) > Wireless Network > the Current Profiles section, click Edit for the profile you would like to configure. TEW-826DAP Wireless Bandwidth Control Wireless (2.4GHz, 5GHz1, or 5GHz2) > Wireless Bandwidth Control Note:
  • TRENDnet TEW-826DAP | Users Guide - Page 31
    TRENDnet User's Guide 4. Click on the Save button then click on the flashing Apply/Discard on Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. TEW-826DAP RSSI Scanner Wireless (2.4GHz, 5GHz1, or 5GHz2) > Wireless RSSI Scanner Note: Please note that
  • TRENDnet TEW-826DAP | Users Guide - Page 32
    TRENDnet User's Guide 1. Log into your management page (see "Access the management page" on page 8). Save & Apply step saves and applies all configuration changes. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP Wireless MAC filter Wireless (2.4GHz, 5GHz1, or 5GHz2) > Wireless MAC Filter
  • TRENDnet TEW-826DAP | Users Guide - Page 33
    TRENDnet User's Guide easy to connect devices to your wireless network. If your wireless devices support WPS, you can use this feature to easily add wireless devices to and click WPS. 3. Review the following WPS settings: WPS Config TEW-826DAP  WPS: Select enable to turn on WPS feature  WPS
  • TRENDnet TEW-826DAP | Users Guide - Page 34
    TRENDnet User's Guide  PIN: Enter the PIN information of the wireless client you want to connect to the network. Click Start you click on Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP 31
  • TRENDnet TEW-826DAP | Users Guide - Page 35
    TRENDnet User's Guide Access click Save to save settings. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP Configurations per band:  Wireless Mode: If all on your wireless devices for the highest wireless capability supported first before applying these settings. If you are unsure
  • TRENDnet TEW-826DAP | Users Guide - Page 36
    TRENDnet User's Guide that only support 802.11b manually set the channel on which the access point will broadcast, click the drop-down list and select the desired Channel for wireless communication. The goal is to select the Channel that is least used by neighboring wireless networks. TEW-826DAP
  • TRENDnet TEW-826DAP | Users Guide - Page 37
    TRENDnet User's Guide Access Point: Wireless Profile (SSID) Wireless (2.4GHz, 5GHz1, or 5GHz2) > Wireless Network 1. Log into your management page (see "Access the management page" on page 8). 2. Click on the wireless band you would like to configure and click Wireless Network. TEW-826DAP 6. Click
  • TRENDnet TEW-826DAP | Users Guide - Page 38
    TRENDnet User's Guide Client Bridge TEW-826DAP 3. Enable Client Bridge, under the wireless band (2.4GHz or 5GHz) you would like to configure and click Wireless Network. © Copyright 2018 TRENDnet. All Rights Reserved. 6. Configure the below settings and click Save and Apply/Discard Changes to save
  • TRENDnet TEW-826DAP | Users Guide - Page 39
    : Manually enter the wireless network name (SSID) you want to establish connection. Or simply click on Site Survey to scan for available wireless network (more details below).  Preferred BSSID: Click option and enter the preferred wireless network you would like to connect to. TEW-826DAP Client
  • TRENDnet TEW-826DAP | Users Guide - Page 40
    TRENDnet User's Guide 4. Click on the wireless network you would like to connect. The information will automatically fill on the previous on Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP 37
  • TRENDnet TEW-826DAP | Users Guide - Page 41
    TRENDnet User's Guide WDS TEW-826DAP 4. Click on the wireless band you would like to configure on the top left section, and click Save & Apply to apply the settings. © Copyright 2018 TRENDnet. All Rights Reserved. Note: Your configurations are not saved and applied until you click on Apply/
  • TRENDnet TEW-826DAP | Users Guide - Page 42
    TRENDnet User's Guide Repeater TEW-826DAP 3. Enable Repeater under the wireless band (2.4GHz or 5GHz) you would like to connect this access wireless band (Wireless 2.4GHz / Wireless 5GHz) you would like to configure and click Wireless Network. © Copyright 2018 TRENDnet. All Rights Reserved. 39
  • TRENDnet TEW-826DAP | Users Guide - Page 43
    TRENDnet User's Guide 5. Configure the below settings and click Save to save settings.  Wireless Mode: Select the wireless mode to set on the selected wireless band in client bridge mode  SSID: Manually specify a new SSID name to use TEW-826DAP Repeater: Scan for wireless networks Wireless (2.
  • TRENDnet TEW-826DAP | Users Guide - Page 44
    TRENDnet User's Guide 4. Click on the wireless network you would like to repeat. The information will automatically fill on the previous screen. You will then need to select and enter the wireless security. TEW-826DAP Repeater: Advanced wireless settings Wireless (2.4GHz, 5GHz1, or 5GHz2) >
  • TRENDnet TEW-826DAP | Users Guide - Page 45
    TRENDnet User's Guide  DTIM: DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. on Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP 42
  • TRENDnet TEW-826DAP | Users Guide - Page 46
    's Guide Management Administration Management > Administration Administrator Settings: 1. Log into your management page (see "Access the management page" on page 8). 2. Click on the Management tab and click Administration. 3. Review the settings and click Save to save settings. TEW-826DAP Device
  • TRENDnet TEW-826DAP | Users Guide - Page 47
    's Guide Management VLAN Management > Management VLAN 1. Log into your management page (see "Access the management page" on page 8). 2. Click on the Management tab and click Management VLAN. 3. Review the settings for the 2.4G and both 5G profiles and click Save to save settings. TEW-826DAP  No
  • TRENDnet TEW-826DAP | Users Guide - Page 48
    TRENDnet User's Guide SNMP Settings Management > SNMP Settings SNMP (Simple Network Management Protocol) is the SNMP trap.  Trap Destination Community Name: Enter the name of the destination community TEW-826DAP  SNMPv3: Select option to enable or disable SNMPv3  Username: Enter the username 
  • TRENDnet TEW-826DAP | Users Guide - Page 49
    folder. (Default Filename: config.bin) 6. Save the configuration file to location on your computer. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP Import Settings (restore from configuration): Management > Backup/Restore Settings 1. Log into your management page (see "Access the
  • TRENDnet TEW-826DAP | Users Guide - Page 50
    TRENDnet User's Guide your access point and have attempted all other troubleshooting. There are two methods that can be TEW-826DAP Upgrade your firmware Management > Upload Firmware TRENDnet may periodically release firmware upgrades that may add features or fix problems associated with your TRENDnet
  • TRENDnet TEW-826DAP | Users Guide - Page 51
    : Management > Time and Date Settings When using NTP or manual configuration, you may also configure Daylight Saving feature. NTP Settings: Management > Time and Date Settings Review the settings below and click Save to save settings. TEW-826DAP  Enable: Check option to enable NTP feature  NTP
  • TRENDnet TEW-826DAP | Users Guide - Page 52
    TRENDnet User's Guide pull-down menu under Add Schedule Rule to Enable wireless schedules. TEW-826DAP 5. After you are done Adding the schedule, Click on the Add to save settings.  Rule Name: Enter desired schedule name.  Service: Allows you to set one of the actions either to Reboot the device,
  • TRENDnet TEW-826DAP | Users Guide - Page 53
    TRENDnet User's Guide SSH Management Management > SSH Management SSH (Secure SHell) is a click on Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. TEW-826DAP Log Management > Log 1. Log into your management page (see "Access the management page" on
  • TRENDnet TEW-826DAP | Users Guide - Page 54
    TRENDnet User's Guide Diagnostics Management > Diagnostics Ping Test Parameter: 1. Log into your management page (see "Access the management page" on page 8). 2. Click on the Management tab and click Diagnostics. TEW-826DAP Download Technical Support Data: Management > Diagnostics 1. Log into your
  • TRENDnet TEW-826DAP | Users Guide - Page 55
    TRENDnet User's Guide LED Control Management > LED Control 1. Log into your management page (see "Access the management page" on page 8). on Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP 52
  • TRENDnet TEW-826DAP | Users Guide - Page 56
    TRENDnet User's Guide AP utility Installation 1. Download the latest version of the utility by navigating to http://www.trendnet.com/support and selecting model TEW-826DAP within the Product Download drop-down list. 2. Extract the contents of the .zip file and run the .exe installer to install the
  • TRENDnet TEW-826DAP | Users Guide - Page 57
    TRENDnet User's Guide  Separate Stations: Select this option to restrict wireless client devices key or password  Password: Enter the login password of the device and click OK to save settings TEW-826DAP Add and Delete Device Add device: 1. Run the utility 2. To add a device to control select
  • TRENDnet TEW-826DAP | Users Guide - Page 58
    TRENDnet User's Guide Upgrade Firmware 1. Run the utility 2. Select the devices you want to conduct a firmware upgrade and click on FW upgrade button TEW-826DAP Load configuration 1. Run the utility 2. Select the devices you want to conduct a configuration upgrade and click Config Upgrade button
  • TRENDnet TEW-826DAP | Users Guide - Page 59
    TRENDnet User's Guide Access Points 1. To view access points that are currently connected to your network, click on the Access Points tab. 2. Review the AP setting information below. TEW-826DAP  SSID: Displays the SSID (Wireless Network Name) of the access points connected on the network  Channel
  • TRENDnet TEW-826DAP | Users Guide - Page 60
    TRENDnet User's Guide Clients 1. To view devices that are currently connected to your network, click on the Clients tab. TEW-826DAP Statistics 1. To view statistical data about your access point, click on the Statistics tab. 2. Review the client setting information below. 2. Review the statistics
  • TRENDnet TEW-826DAP | Users Guide - Page 61
    TRENDnet User's Guide  Most Active Device: Displays the access point with the most activity in comparison between other access points download, all) that has been passed. This can be configured to display only upload, download, or all. TEW-826DAP © Copyright 2018 TRENDnet. All Rights Reserved. 58
  • TRENDnet TEW-826DAP | Users Guide - Page 62
    TRENDnet User's Guide Technical Specifications Standards  IEEE 802.3  IEEE 802.3u  IEEE 802. VLAN assignment per SSID  IPv6 support (Link-Local, Static IPv6, Auto-Configuration (SLAAC/DHCPv6)) © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP  Multi-Language interface, English, French
  • TRENDnet TEW-826DAP | Users Guide - Page 63
    TRENDnet User's Guide QoS   WMM Bandwidth control per SSID or client SSID  Up to 8 SSIDs per 28.74 dBm (max.) / CE: 28.74 dBm (max.) / IC: 30.37 dBm (max.) © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP  802.11ac: FCC: 27.45 dBm (max.) / CE: 28.74 dBm (max.) / IC: 29.55 dBm
  • TRENDnet TEW-826DAP | Users Guide - Page 64
    TRENDnet User's Guide Disclaimer *Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data statically assigned, but will be available within the available wireless channels when set to auto. TEW-826DAP © Copyright 2018 TRENDnet. All Rights Reserved. 61
  • TRENDnet TEW-826DAP | Users Guide - Page 65
    TRENDnet User's Guide Troubleshooting Q: I typed difficulties, please contact your computer or operating system manufacturer for assistance. TEW-826DAP Q: I cannot connect wirelessly to the access point. What should wireless connectivity problems. © Copyright 2018 TRENDnet. All Rights Reserved. 62
  • TRENDnet TEW-826DAP | Users Guide - Page 66
    TRENDnet User's Guide Appendix How to find your IP address? Note: Please note that see your network status and your IP address settings displayed. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP Note: If you are experiencing difficulties, please contact your computer or operating system
  • TRENDnet TEW-826DAP | Users Guide - Page 67
    TRENDnet User's Guide In MAC 10.4, from the Configure IPv4, drop-down list, select Using . 3. Click the Advanced button. 3. On the Ethernet tab, the Ethernet ID is your MAC Address. TEW-826DAP How to connect to a wireless network using the built-in Windows utility? Note: Please note that although
  • TRENDnet TEW-826DAP | Users Guide - Page 68
    TRENDnet User's Guide Federal Communication , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, under our sole responsibility. TEW-826DAP Europe - EU Declaration of Conformity TRENDnet hereby declare that the product
  • TRENDnet TEW-826DAP | Users Guide - Page 69
    TRENDnet User's Guide Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the é avec un minimum de 25 cm de distance entre la source de rayonnement et votre corps. © Copyright 2018 TRENDnet. All Rights Reserved. TEW-826DAP 66
  • TRENDnet TEW-826DAP | Users Guide - Page 70
    more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing in order to initiate warranty service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA
  • TRENDnet TEW-826DAP | Users Guide - Page 71
    TRENDnet User's Guide shipping from outside of the USA and Canada are responsible for codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please visit http://www.gnu.org/licenses/gpl.txt or http://
  • TRENDnet TEW-826DAP | Users Guide - Page 72
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
TRENDnet User’s Guide
Cover Page