Sharp XG-PH70X XG-PH70X Operation Manual - Page 25
Projecting a Reversed Image
![]() |
UPC - 074000365117
View all Sharp XG-PH70X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Projecting a Reversed Image Projection from behind the Screen ■ Place a translucent screen between the projector and the audience. ■ Reverse the image by setting "Rear" in the "PRJ Mode" menu. (See page 84.) Setup Translucent screen Audience Projection Using a Mirror ■ Place a mirror (normal flat type) in front of the lens. ■ When the translucent screen is placed between the mirror and audience, set to "Front" in the "PRJ Mode" menu. (See page 84.) ■ When the mirror is placed on the audience side, set to "Rear" in the "PRJ Mode" menu. (See page 84.) Set to "Front" Set to "Rear" Mirror Audience Translucent screen Audience Mirror Info • When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected light does not shine into the eyes of the audience. Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately). • AN-PHCM20 ceiling-mount bracket, its AN-EP101AP extension tube (for the U.S.A.). • AN-NV6T ceiling-mount bracket, its AN-TK201 and AN-TK202 extension tubes (for countries other than the U.S.A.). ■ Invert the image by setting "Ceiling + Front" in "PRJ Mode". See page 84 for use of this function. -23
![](/manual_guide/products/sharp-xgph70x-xgph70x-operation-manual-8fb9d61/25.png)