Sharp MX-M1056 User Manual - Page 9
Interior
![]() |
View all Sharp MX-M1056 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE INTERIOR (1) (2) (3) (4) (5) (6) (1) The main power switch Use this switch to turn on the power for the machine. ► TURNING ON THE POWER (page 1-10) (2) Toner cartridge This cartridge contains toner. When the toner in a cartridge runs out, the cartridge out must be replaced. ► REPLACEMENT OF TONER CARTRIDGE (page 1-156) (3) Paper reversing section cover This unit is used for reversing paper when 2-sided printing is performed. Open this cover to remove a paper misfeed. (4) Fusing unit Heat is applied here to fuse the transferred image onto the paper. The fusing unit is hot. Take care not to burn yourself when removing a misfeed. Do not touch or damage the transfer belt. This may cause a defective image. (6) Waste toner bottle This bottle collects excess toner that is produced during printing. ► REPLACING THE WASTE TONER BOTTLE (page 1-159) A service technician collects replaced waste toner bottles. (5) Transfer belt This belt takes the image formed with toner off the photoconductive unit and transfers the image onto paper. 1-6
![](/manual_guide/products/sharp-mxm1056-user-manual-5e07f96/9.png)