Sharp MX-M1056 User Manual - Page 644
Select the units used in the Side1/2, XY Print Position Settings, Print a test pattern, Read
View all Sharp MX-M1056 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 644 highlights
SETTING MODE►SYSTEM SETTINGS Side1/2, XY Print Position Settings The Side1/2, XY Print Position Settings are used to make the centers of the Side 1 and Side 2 print positions match to remove printing misalignment. Tap the [Change] button in Side1/2, XY Print Position Settings to display the advanced settings screen of Side1/2, XY Print Position Settings. (1) Select the units used in the Side1/2, XY Print Position Settings Tap [mm] to select the units used for the settings. (2) Print a test pattern Before starting, print a test pattern from [Test Print] in Side 1/2, XY Print Position. One page of patterns for settings are printed by duplex printing. For information on the measurement patterns, refer to "Measurement patterns for Side1/2, XY Ratio Settings / Side1/2, XY Print Position Settings". (3) Read the scale from the patterns and enter the values. Y X Fold the sheet in half with the center in the horizontal and vertical direction as folding lines respectively and put creases at both ends, then unfold to return. Measure the crease position of X and Y by scale for Side1 and Side2 respectively and input the values. If the values of both ends are different, the average value should be input. 7-68