Sharp MX-M1056 User Manual - Page 649

SETTING MODE►SYSTEM SETTINGS Total Setting for Finish Select the finish setting. Set whether finishing positions are specified on the specified paper or on the original. Disabling of Duplex This is used to disable 2-sided printing, such as when the duplex module malfunctions. Disabling of Offset Disable offset output. Disabling of Stapler This setting is used to prohibit the use of staple, such as when the staple of finisher or saddle finisher malfunctions. Disabling of Punch This setting is used to prohibit the use of punch, such as when the punch module of finisher or saddle finisher malfunctions. Disabling of Document Feeder Use this setting to prohibit the use of the automatic document feeder, such as when the feeder malfunctions. (When the setting is enabled, scanning is still possible using the document glass.) Disabling of Inserter Disables use of the inserter. Disabling of Folding Unit This setting is used to disable the folding unit. You can use the saddle folding with the saddle finisher even if the folding unit is disabled. Disabling of Trimming Module This setting is used to disable the trimming module. Disabling of Large Capacity Cassette This setting is used to disable the large capacity cassette, such as when it malfunctions. Disabling of Optional Paper Drawer This setting is used to disable the optional paper drawer, such as when it malfunctions. Disabling of Tray Settings This setting is used to prohibit tray settings (except for the bypass tray). Disabling of Bypass-Tray This setting is used to prohibit the use of bypass tray, such as when it malfunctions. Disabling of Finisher This setting is used to prohibit the use of finisher or saddle finisher, such as when it malfunctions. Status Indicator Setting Data Indicator Setting 7-73