Sanyo PLC-WXU300 RS232 Expand - Page 66
CR_PIPPOSITION Command, 11.16 CR_STANDBYMODE Command, 11.17 CR_P-MANE Command, 11.18 CR_P-
UPC - 086483074226
View all Sanyo PLC-WXU300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
PLC-WXU300 Expand Serial Command Functional Specifications 9.11.15 CR_PIPPOSITION Command Command "CR_PIPPOSITION" [CR] Details Get position of Subpicture in Picture in Picture Acceptable "000_%1"[CR] "BTMRIGHT Subpicture is Bottom right Response %1 "BTMLEFT Subpicture is Bottom left "TOPRIGHT Subpicture is Top right "TOPLEFT Subpicture is Top left Unacceptable "Error code"[CR] 9.11.16 CR_STANDBYMODE Command Command "CR_STANDBYMODE" [CR] Details Get Standby Mode setting status Acceptable "000_%a"[CR] Response %a "ECO Eco Mode "NORMAL" -------- Network Mode Unacceptable "Error code"[CR] 9.11.17 CR_P-MANE Command Command "CR_P-MANE"[CR] Details Get Power management setting status Acceptable "000_%a"[CR] "OFF Power Management is OFF Response %a "READY Power Management is Ready "SHUTDOWN" ---- Power Management is set to Shut Down mode Unacceptable "Error code"[CR] 9.11.18 CR_P-MANETIME Command Command "CR_P-MANETIME"[CR] Details Get time to start Power Management Acceptable "000_%a"[CR] Response %a "001"~"030 1 minute to 30 minutes Unacceptable "Error code"[CR] 9.11.19 CR_ON-STA Command Command "CR_ON-STA"[CR] Details Get Power ON Start setting status Acceptable "000_%a"[CR] Response %a "ON Power ON Start is ON "OFF Power ON Start is OFF Unacceptable "Error code"[CR] 65/72