Rane Sixty-Eight Sixty-Eight Mixer Manual for Serato DJ - Page 11
Sixty-Eight Connections
View all Rane Sixty-Eight manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
OWNER'S MANUAL Sixty-Eight Connections Power Supply The Sixty-Eight Mixer features an internal universal switching power supply that operates on any AC mains 100 to 240 VAC, 50 or 60 Hz (most places in the world). All that is required when traveling is the appropriate IEC line cord, available from a local electronics store. The universal supply is a major plus for the traveling DJ. Though this mixer has turn on/off muting, it's smart to leave the power unplugged until everything else is connected. PGM Inputs 1-4 The Sixty-Eight has four stereo analog inputs for PGM 1 through PGM 4. Any of these analog inputs may be set for Phono Input, Line Input or S/PDIF using the P - L - S switches located on the rear panel. Unused inputs are best set to LINE. Attach your turntable's ground wires to the Phono Ground connectors. Any of the four analog inputs may be used for Serato DJ vinyl emulation control. Input 1 or Input 2 may be selected for Serato DJ Virtual Deck 1 or 2 control. Input 3 or Input 4 may be selected for Serato DJ Virtual Deck 3 or 4 control. Control input sources are selected in Serato DJ software. Mic Inputs The Mic Inputs will accept an XLR 3-pin plug, a balanced ¼" TRS (tip-ring sleeve) plug or an unbalanced TS (tip-sleeve) plug. Mic 1 has a switchable phantom power option, and Mic 2 has a switchable line level option. Analog Outputs All analog outputs come from the same "Main Mix" signal. Main, Booth and Session outputs each have their own Level control. The Main output is on balanced XLR jacks with pin 2 "hot" per AES standards. The Booth output is on balanced ¼" TRS (tip-ring-sleeve) jacks, though unbalanced TS (tip-sleeve) plugs may be used. The Session output is on regular unbalanced RCA jacks. Because all signals are identical, users may use any of these outputs as the "main" output if a different cable type is required for system connection. Rane recommends balanced wiring for the strongest signal and rejection of hum and noise. If your cable to the amp rack is less than 10 feet (3 meters), you can usually get away with an unbalanced cable. See the RaneNote "Sound System Interconnection" at rane.com for details and cable wiring. SIXTY-EIGHT MAIN OUT RIGHT LEFT MADE IN U.S.A. RANE CORP. BOOTH OUT RIGHT LEFT 100-240V 50/60 Hz 15 WATTS USB B ACN 001 345 482 USB A SESSION OUT IN L R AUX INPUTS 4 3 2 1 L L R R ANALOG INPUTS PHONO GROUNDS INPUT SELECT: PHONO - LINE - S/PDIF P - L - S P - L - S P - L - S P - L - S 2 S/PDIF 1 4 3 FLEXFX LOOP RETURN RIGHT LEFT SEND RIGHT LEFT 4 3 L R 2 1 L R MIC INPUTS MIC 1 OFF - +48 MIC 2 MIC - LINE SIXTY-EIGHT 11