Polk Audio DSW PRO 660 PRO - Page 12
Remote Control, What Is That Blinking Blue Light?
View all Polk Audio DSW PRO 660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
DSWPROWI REMOTE CONTROL Wreless ready subwoofers come with a credit card sized remote control. All commands are sent to the subwoofer via IR control. The IR receiver is located on the front of the subwoofer when the subwoofer is in its downward firing configuration. The remote control has the following features: • Power • Volume • 4 Button Phase Control (0, 90, 180 and 270 degree settings) • 4 Button Polk Room Optimizer (PRO) presets • Mute function • Night function allows you to hear low-level bass detail at lower volumes. If you have the volume at 30 and press "night," the volume is reduced by 50%, in this example to 15. Pressing "night" a second time restores the volume to its original setting. Pressing Volume+ (or Volume-) incrementally increases (or decreases) the volume in the normal manner and takes the subwoofer out of "night" mode. Also, the LED shines at a reduced intensity when the subwoofer is in "night" mode. • Reset button restores the woofer's settings to factory presets. Hold down for two (2) seconds. • LED turns LED On/Off. The amplifier remains active. Important: To activate the remote control for the first time, remove the plastic tab. IR Receiver WHAT IS THAT BLINKING BLUE LIGHT? Behind the logo badge on the front of your subwoofer there is a blue LED. The blue light blinks whenever you press a button on the subwoofer's remote control. The light lets you know that the subwoofer has received the command and is enabling the function you've selected. The following table describes each button's function and how the LED communicates to you: VOLUME SETTINGS Volume Level 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Power Volume Mute Phase Night PRO Presets Reset LED LED is on when power is active and is off when power is not active. (Pressing the LED button on the remote will also turn the LED off.) LED will blink a 2-digit code indicating volume setting from 0 to 40 (i.e., if the volume is turned up to 28, the LED will flash two long blinks followed by eight short blinks). LED blinks slowly when "mute" is selected. 0 degrees-1 blink; 90 degrees-2 blinks; 180 degrees-3 blinks; 270 degrees-4 blinks. LED is on at a lower intensity; volume is reduced by 50%. Cabinet-1 blink; Corner-2 blinks; Mid-wall-3 blinks; Mid-room-4 blinks. LED will blink 4 times. Turns LED on/off. The amplifier remains active. Blue LED Indicator Long Blinks Short Blinks 4 0 3 9 3 8 3 7 3 6 3 5 3 4 3 3 3 2 3 1 3 0 2 9 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 1 6 1 5 1 4 1 3 1 2 1 1 1 0 0 9 0 8 0 7 0 6 0 5 0 4 0 3 0 2 0 1 0 0 12 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)