Panasonic UF-7950 Industrial Facsimile - Page 32
Problem Solving, User Error Codes U Code, Check Points
![]() |
View all Panasonic UF-7950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Getting To Know Your Machine Operation Chart Problem Solving User Error Codes (U Code) U20 U90 U01 U13 U16 Code U01 U13 U16 Check Points Front Cover is open. Low Toner, or Out of Toner. (See page 28) Toner Cartridge is not installed correctly. Code U20 U90 Check Points ADF Cover is open. Battery requires replacement. (See page 136) Jam Error Codes (J Code) Code Check Points J00 Remove paper from the Sheet Bypass. J01, Pull out the paper tray(s), and remove the J02 jammed paper from the tray(s). (See page 30) Check to make sure the Paper Guides are properly adjusted in the tray(s). (See page 118) J43, Remove misfed paper(s) inside the machine. J44, (See page 30) J80, J82, J83 Code J71, J72, J74, J75, J92, J93 Check Points Remove misfed paper(s) in the ADF. (See page 30) 32 NOTE 1. The J## Code indicates the most probable Jam location. If the jam message reappears after the jam is cleared, paper is most likely jammed at other location(s). Check the Jam Error Codes Table above for other check points, and remove all misfed paper. 2. Make sure that the Jam Error Code disappears after removing the misfed paper. 3. The Jam Error Code will not disappear if the paper is still jammed in the machine. Check again, and remove all misfed paper.
![](/manual_guide/products/panasonic-uf6950-industrial-facsimile-7ba4e8b/32.png)