Panasonic HX-A1M Basic Owners Manual - Page 29

Troubleshooting

Page 29 highlights

Others Troubleshooting ∫ It is not a malfunction in following cases The lens fogs up. ≥ This is due to condensation. It is not a malfunction. Please refer to page 8. Problem This unit cannot be turned on. This unit does not stay on long enough. Check points ≥ Charge the battery again to ensure it is sufficiently charged. (l 13) ≥ In cold places, the battery using time becomes shorter. ≥ If the operating time is very short even after the battery has been recharged sufficiently, the battery has worn out. Battery runs down quickly. Color balance of images is strange when recording in a place such as a gymnasium. Recorded motion pictures flicker. Horizontal lines appear in recorded images. The Wi-Fi connection is not possible between this unit and a smartphone. The Wi-Fi connection is disconnected immediately. ≥ In a place with multiple light sources, such as a gymnasium or a hall, set the [White Balance] setting to [Indoor 2]. If you cannot record clearly with the [Indoor 2], set it with [Custom]. ≥ If you record an image with [1280k720/60fps] or [848k480/ 120fps] in [Slow Motion], flickering or horizontal lines may appear under fluorescent lighting. ≥ Make sure the smartphone is properly connected to this unit by checking the Wi-Fi settings of the smartphone. ≥ Make sure the SSID and Password have been correctly input. ≥ Make sure the smartphone is not connected to the wireless access point. If it is connected to the wireless access point, change the Wi-Fi access point using the smartphone's Wi-Fi set up. ≥ If there is a setting for avoiding unnecessary connections in the Wi-Fi setting menu of the Android device, turn it off. Please refer to the operating instructions (PDF format) for details. 29 (ENG) SQT0885

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

29
(ENG) SQT0885
It is not a malfunction in following cases
Please refer to the operating instructions (PDF format) for details.
Others
Troubleshooting
The lens fogs up.
This is due to condensation. It is not a malfunction. Please
refer to page 8.
Problem
Check points
This unit cannot be turned
on.
This unit does not stay on
long enough.
Battery runs down quickly.
Charge the battery again to ensure it is sufficiently charged.
(
l
13)
In cold places, the battery using time becomes shorter.
If the operating time is very short even after the battery has
been recharged sufficiently, the battery has worn out.
Color balance of images is
strange when recording in
a place such as a
gymnasium.
In a place with multiple light sources, such as a gymnasium or
a hall, set the [White Balance] setting to [Indoor 2]. If you
cannot record clearly with the [Indoor 2], set it with [Custom].
Recorded motion pictures
flicker.
Horizontal lines appear in
recorded images.
If you record an image with [1280
k
720/60fps] or [848
k
480/
120fps] in [Slow Motion], flickering or horizontal lines may
appear under fluorescent lighting.
The Wi-Fi connection is
not possible between this
unit and a smartphone.
Make sure the smartphone is properly connected to this unit
by checking the Wi-Fi settings of the smartphone.
Make sure the SSID and Password have been correctly input.
Make sure the smartphone is not connected to the wireless
access point. If it is connected to the wireless access point,
change the Wi-Fi access point using the smartphone’s Wi-Fi
set up.
The Wi-Fi connection is
disconnected immediately.
If there is a setting for avoiding unnecessary connections in
the Wi-Fi setting menu of the Android device, turn it off.