Panasonic HX-A1M Basic Owners Manual - Page 25

Attaching this unit to the Tripod Mount 1 While holding D, loosen the adjustment belt B until this unit can be passed through it by rotating the tightening nut C towards UNLOCK. 2 Pass this unit through the adjustment belt B so that this unit is in the position shown in the figure.  UNLOCK LOCK    3 While holding D, tighten the adjustment belt B by rotating the tightening nut C towards LOCK until this unit is fastened securely. ≥ Adjust the adjustment belt with hands. Do not apply too much force. ≥ Do not rotate the tightening nut more than necessary after fastening this unit. ≥ Check the direction of this unit after attaching it. ≥ To correct the left/right tilt of this unit, loosen the adjustment belt. Removing this unit from the Tripod Mount While holding D, loosen the tightening nut C by rotating it towards UNLOCK, and remove this unit.   UNLOCK LOCK    UNLOCK LOCK ≥ This unit is not waterproof when the terminal cover (USB connection) is in use. In this case, do not use this unit underwater or touch it with wet hands. 25 (ENG) SQT0885