Panasonic HX-A1M Basic Owners Manual - Page 27

Recording with this unit Record images with this unit. ≥ You can record images even when this unit is not connected to a smartphone. 1 Press the recording mode/Wi-Fi button to switch to the desired recording mode. ≥ The recording mode changes each time you press the button. The recording mode lamps will light (or flash). Motion Picture Recording Mode # Slow Motion Recording Mode # Still Picture Recording Mode Recording Mode Motion Picture Recording Mode Slow Motion Recording Mode Still Picture Recording Mode Recording mode lamp Lit Flashing Lit Lit Flashing Recording method [Normal Shooting]: Recording motion pictures. [Loop Recording]*1: No matter how long you record, you can only record motion pictures for the last 1 hour to microSD card. [Slow Motion]: This records motion pictures in slow motion by setting a high frame rate (increasing the number of frames). Normal still picture recording: Recording a still picture. [Interval rec mode]*2: This is for recording still pictures at a set interval. *1 You need to set [Recording Mode] of the "Image App" to [Loop Recording]. *2 You need to select a setting other than [OFF] for [Interval rec mode] of the "Image App". 2 Press the recording start/stop button. In Motion Picture Recording Mode/Slow Motion Recording Mode:  The access lamp will light red and recording will start. ≥ If you press the recording start/stop button again, the recording will stop. While data is being recorded, the access lamp will flash. Do not remove the microSD card until the access lamp goes off. In Still Picture Recording Mode: Recording still pictures. ≥ In [Interval rec mode], the access lamp will light red and recording will start. If you press the recording start/stop button again, the recording will stop. A Access lamp Please refer to the operating instructions (PDF format) for details. 27 (ENG) SQT0885