Panasonic HX-A1M Basic Owners Manual - Page 19

Preparation Connecting to a smartphone ∫ Preparations before connection 1 Install the smartphone application "Image App" on your smartphone. (l 18) 2 Turn on the Wi-Fi function of your smartphone. ≥ For further details, please read the operating instructions for the smartphone. Setting up a Wi-Fi connection to a smartphone ≥ Check that the Wi-Fi lamp is off. 1 Press and hold the recording mode/Wi-Fi button for at least 1 second (approx.), and remove your finger. ≥ The Wi-Fi lamp will flash red. 2 Tap the SSID of this unit (below) on the Wi-Fi network screen of the smartphone. ≥ Password entry screen is displayed. 3 Enter password (below). ≥ When the connection is complete, the Wi-Fi lamp of this unit will light red. Default setting SSID: Password: A1-wearable a12345678 Preparation Setting up this unit Use your smartphone to set up this unit. Preparation: 1 Set up a Wi-Fi connection between this unit and the smartphone. 2 Start up the smartphone application "Image App". ≥ When you start "Image App" connecting with this unit for the first time, a message asking you to set the date and time will appear. (This message will also be displayed if this unit remains unused for a long period of time.) Follow the message to set the date and time. ≥ When you turn on this unit for the first time, a message asking you to change the SSID/ Password will appear. Be sure to change them. Otherwise, third parties may intercept your information or use it for malicious purposes. ≥ If a connection attempt to this unit fails, turn off and on the Wi-Fi function using the setup menu of the smartphone, and then retry the connection. ≥ For more information, refer to the [Help] in the "Image App" menu. 19 (ENG) SQT0885