Panasonic AJSDC915 AJSDC915 User Guide - Page 134
MIC/AUDIO screen, Remarks, STEREO, FRONT, F&R, display, USER menu, ENG menu
View all Panasonic AJSDC915 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
MAIN Menu Screen 3 of 4 (SUB menus) MIC/AUDIO screen The MIC/AUDIO items are set on this screen. ¢| M I C/A U D I O { F RON T POWE R : ON FRONT M I C : ∂4 0 dB REAR M I C CH1 : ∂6 0 dB REAR M I C CH2 : ∂6 0 dB L I NE CH1 / CH2 : µ4 dB REAR AUD I O : STEREO M I C L OW CU T CH 1 : F RON T M I C L OW CU T CH 2 : F RON T EMPHAS I S : OFF L I M I TER : OFF TEST TONE : NORMA L Item FRONT POWER FRONT MIC REAR MIC CH1 Variable range ON OFF p40/p50/ 60 dB p40/p50/ p60 dB VF display ENG ENG ENG Remarks ON: The phantom power is supplied to the front microphone. OFF: The phantom power is not supplied to the front microphone. This selects the camera mic input level. This selects the mic level of the rear AUDIO CH1 input jack. REAR MIC CH2 p40/p50/ ENG p60 dB This selects the mic level of the rear AUDIO CH2 input jack. LINE CH1/CH2 o4/0/ p6 dB ENG This selects the line input level of the rear AUDIO CH1 and CH2 input jacks. REAR AUDIO STEREO ENG MONO This selects the rear jack AUDIO CH1 and CH2 input method. STEREO: Stereo input is selected. (The CH1 input signals are recorded on CH1 and the CH2 input signals are recorded on CH2.) MONO: Monaural input is selected. (The CH1 and CH2 input signals are mixed, and the mixed signals are recorded on both CH1 and CH2.) MIC LOWCUT CH1 FRONT REAR F&R OFF ENG FRONT: The CH1 input high-pass filter is set to ON only when FRONT is selected. REAR: The CH1 input high-pass filter is set to ON only when REAR is selected. F&R: The CH1 input high-pass filter is set to ON regardless of whether FRONT or REAR is selected. OFF: The CH1 input high-pass filter is set to OFF. |Note{ ÁThe frequency response when ON is selected for the MIC LOWCUT item setting is 200 Hz to 10 kHz. MIC LOWCUT CH2 FRONT REAR F&R OFF ENG FRONT: The CH2 input high-pass filter is set to ON only when FRONT is selected. REAR: The CH2 input high-pass filter is set to ON only when REAR is selected. F&R: The CH2 input high-pass filter is set to ON regardless of whether FRONT or REAR is selected. OFF: The CH2 input high-pass filter is set to OFF. The underlining in the variable range column indicates the setting in the preset mode. USER menu: The USER menu appears when the MENU switch is set to SET. ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are held down together. - 134 -