Palm M105 Handbook - Page 194
modems have a Setup String that causes, them to send initial connection sounds to
UPC - 662705901459
View all Palm M105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
I tried to do a modem HotSync operation, but it did not complete successfully. Check the following on your computer: s Make sure your computer is turned on and that it does not shut down automatically as part of an energy-saving feature. s Make sure the modem connected to your computer is turned on and is connected to the outgoing phone line. s Make sure the modem you are using with your handheld has an on-off switch. Your handheld cannot "wake up" a modem that has an auto-off feature. s Make sure the modem is connected properly to a serial port or USB port on your computer and that it is connected to the incoming phone line. On a Windows computer, check the following: s Make sure Modem is checked in the HotSync Manager menu. s Confirm that the Setup String in the Setup dialog box configures your modem correctly. You may need to select a different Modem Type or enter a custom Setup String. Most modems have a Setup String that causes them to send initial connection sounds to a speaker. You can use these sounds to check the modem connection. s Confirm that the Speed setting in the Setup dialog box works for your modem. If you have problems using the As Fast As Possible option or a specific speed, try using a slower speed. s Make sure you are not running another program, such as WinFax, CompuServe, or America Online that uses the serial port you selected in the Setup dialog box. s Make sure your modem resets before you try again. (Turn off your modem, wait a minute, then turn it back on.) Page 187 Frequently Asked Questions