Palm M105 Handbook - Page 144
To return to cradle/cable HotSync operations on a Macintosh:, Conducting a HotSync operation via
UPC - 662705901459
View all Palm M105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
4. Select the COM port where your cradle/cable is connected. 5. Click OK. Now, the next time you want to perform a HotSync operation, just press the HotSync button on the cradle/cable, as you always did in the past. To return to cradle/cable HotSync operations on a Macintosh: 1. If needed, connect the cradle/cable to a serial port on your Macintosh. 2. Double-click the HotSync Manager icon in the Palm folder. 3. In the HotSync Controls tab, select Enabled. 4. Click the Serial Port Settings tab. 5. Under Check for handheld connection using, select Local Setup. 6. Under Local Setup, select the port where your cradle/cable is connected from the Port pop-up menu. 7. Close the HotSync Software Setup window. Now, the next time you want to perform a HotSync operation, just press the HotSync button on the cradle/cable, as you always did in the past. Conducting a HotSync operation via modem You can use a modem to synchronize your handheld when you are away from your computer. Note: The first HotSync operation must be local, using the HotSync cradle/cable. After that, you can perform a modem HotSync operation. To perform a HotSync operation via modem you need the following: s A modem connected to your computer. s Palm Desktop software configured for use with the modem. s A modem connected to your handheld. s A configuration for the kind of modem connection (Serial to Modem or IrCOMM to Modem) you want to make. See "Connection preferences" in Chapter 6 for more information. Page 137 Advanced HotSync® Operations