Oki CX4545MFP Printing Guide - Page 33

2.PRINTING FROM WINDOWS 2 PRINTING FROM WINDOWS  When you select the bypass tray as a paper source but the orientations of the original and the paper on the bypass tray differ, the data in the original are rotated for 90 degrees and printed in the same orientation as that of the original, as long as their paper sizes are the same (this is available only for A4, B5, LT and 16K). For example, when an original is A4 in a portrait direction but the paper on the bypass tray is A4-R, the data of the original are printed in A4 in a portrait direction.  The selectable values vary depending on the optional devices installed on this equipment and their configuration on the [Device Settings] tab.  When paper such as special or tab paper that needs to be fed from the bypass tray is set, [Bypass Tray] may be automatically selected in the [Paper Source] box, and then a confirmation dialog box may appear.  When the paper size settings on the [Device Settings] tab differ from those in the equipment, the paper source setting is ignored and the equipment may prompt to set the paper in the bypass tray.  The Large Capacity Feeder (optional) is not available for some countries or regions. 5) Paper Type This sets the media type of the paper. - Plain (Auto) - Select this when printing on plain paper. - Plain - Select this when printing on plain paper. - Recycled - Select this when printing on recycled paper. - Thick1 - Select this when printing on thick 1 paper. - Thick2 - Select this when printing on thick 2 paper. - Thick3 - Select this when printing on thick 3 paper. - Thick4 - Select this when printing on thick 4 paper. - Special 1 - Select this when printing on special 1 paper. - Special 2 - Select this when printing on special 2 paper. - Transparency - Select this when printing on transparent sheets. - Plain1 - Select this when printing on plain 1 paper. - Plain2 - Select this when printing on plain 2 paper. - Thick1 (Back) - Select this when printing on the back side of thick 1 paper. - Thick2 (Back) - Select this when printing on the back side of thick 2 paper. - Thick3 (Back) - Select this when printing on the back side of thick 3 paper. - Thick4 (Back) - Select this when printing on the back side of thick 4 paper. - Special 1 (Back) - Select this when printing on the back side of special 1 paper. - Special 2 (Back) - Select this when printing on the back side of special 2 paper. - Thin - Select this when printing on the back side of thin paper.  The applicable paper weight for each paper type differs depending on the model. For details of the paper weight, refer to the corresponding Quick Start Guide.  When [A4 Tab] or [Letter Tab] is selected at the [Print Paper Size] box, [Tab] will be displayed and you cannot change the paper type.  Setup items differ depending on the model. For more information about the paper types that are available for this equipment, refer to the Quick Start Guide. Setting Up Print Options 31