Oki C9300nccs C9300/C9500 Finisher User Guide - Page 23

Stapling Enables or disables stapling Off Disables stapling (default setting) On Enables stapling USAGE MENU options Stapling Count Punching count Finisher count Displays the number of staples used. Displays the number of punch operations completed. Displays the number of sheets ejected to the Finisher. Print Driver Setting The operating systems supported are as follows: PostScript: Windows 95, 98, Me, 2000, NT4, XP, Macintosh PCL: Windows 95, 98, Me, 2000, NT4, XP. Note: The following instructions explain the driver settings involved to use the Finisher. Other settings are explained in your printer's User's Guide. Finisher-related settings The settings required for the Finisher are: 1. Enable the Finisher in the printer driver. 2. Define the number of paper trays installed (a total of 5, i.e. 1 original tray, 1 additional tray and 1 high capacity feed unit). 3. Define the paper orientation (Portrait, Landscape or Landscape with 180 deg rotation of printed data) to suit your punching and/or stapling requirements. Portrait Landscape No rotation Staple top left Punch left long edge Staple top right Punch top edge 180 deg rotation Staple bottom right Punch right long edge Staple bottom left Punch bottom edge 20