NordicTrack C 990 Instruction Manual - Page 9
tighten the Screws yet.
View all NordicTrack C 990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire (81). Attach the Right Upright (90) and a Wheel (25) with two 3/8" x 2 1/4" Screws (7), a 3/8" x 1 1/4" Screw (63), a 3/8" x 1 3/4" Screw (62), and four 3/8" Star Washers (13) as shown; do not fully tighten the Screws yet. Attach the Left Upright (not shown) and the other Wheel (not shown) in the same way. Note: There are no wires on the left side. 4 94 63 13 90 5. Remove and save the four 5/16" x 3/4" Screws (4). 5 Identify the Left and Right Base Covers (82, 83). Slide the Left Base Cover onto the Left Upright (89), and slide the Right Base Cover onto the Right Upright (90). Do not press the Base Covers into place yet. 4 89 82 7 13 81 62 13 25 4 90 83 6. Identify the left handrail assembly (E). Attach the left handrail assembly to the Left Upright 6 (89) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11); do not fully tighten the Screws yet. Then, remove and discard the indicated screw (F). 28 11 F E 89 9