Nikon P6000 P6000 User's Manual - Page 50

Shooting with the Self-timer/Remote Control Shooting with Remote Control An optional remote control (ML-L3) is required. 1 Choose Remote control mode using the multi selector in the self-timer menu (step 2 of A35) 10s and press the k button. 2s • Z (quick-response remote): Press the send button on the 10s remote control to shoot instantly. 2s • Z 10 s (ten seconds remote): Press the send button on the remote control to shoot ten seconds after camera has focused. Remote control • Z 2 s (two seconds remote): Press the send button on the remote control to shoot two seconds after camera has focused. • The icon for the selected remote control mode is displayed. • If a setting is not applied by pressing the k button within a few seconds, the selection will be cancelled. 2 Frame the picture. Basic Photography and Playback: Auto Mode 3 Aim the transmitter at the infrared receiver on the front of the camera and press the send button. • Press the send button from a distance of 5 m (16 ft.) or less. • In quick-response remote mode, once focus has been locked the shutter will be released and the self-timer lamp will flash. • In ten seconds or two seconds remote mode, the selftimer lamp will blink, and glow approximately for one second before the shutter is released. • When the shutter is released in ten seconds or two seconds remote mode, the remote control mode will turn to OFF. • To stop the timer before a picture is shot, press the send button again. 36 1/125 F2.7 14 9 1/125 F2.7 14