Nikon P6000 P6000 User's Manual - Page 31
Removing the Battery, Turning On and Off the Camera, Notes on the Battery
UPC - 018208261352
View all Nikon P6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
First Steps Removing the Battery Before removing the battery, turn the camera off and confirm that the power-on lamp and monitor are off. To eject the battery, open the battery-chamber/ memory card slot cover and slide the battery latch in the direction shown 1. The battery can then be removed by hand 2. • Note that the battery may become hot during use; observe due caution when removing the battery. Turning On and Off the Camera Press the power switch to turn on the camera. The power-on lamp (green) will flicker and the monitor will turn on. To turn off the camera, press the power switch again. When the camera turns off, both the power-on lamp and the monitor will turn off. • When the camera is off, holding down the c button will turn the camera on in playback mode. Inserting the Battery B Notes on the Battery • Be sure to read and follow the warnings and cautions of "For Your Safety" (Aiii), before using the rechargeable battery. • Be sure to read and follow the warnings for "The Battery" (A183) of the section "Caring for the Camera", before using the battery. • If the battery is not used for long periods of time, make sure to charge the battery once every half a year, and keep the battery after it has been exhausted. D Auto Power Off in Shooting Mode (Standby Mode) The monitor will dim to reduce the drain on the battery if no operations are performed for about five seconds. The monitor will brighten when camera controls are used. At default settings, the monitor will turn off altogether if no operations are performed for about a minute during shooting and playback. The camera will turn off automatically if no operations are performed for another three minutes (auto power off function). To turn on the monitor when it's turned off, press the shutter-release button halfway or the c button. • The time taken until the monitor turns off completely can be changed in Auto off (A169) in the setup menu (A159). 17